home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Kompuutteri Kaikille K-CD 2002 #6
/
K-CD_2002-06.iso
/
OmniPage 9
/
omnipage
/
scanmgr
/
scanmgr.ini
< prev
next >
Wrap
INI File
|
1998-09-29
|
6KB
|
254 lines
; Modified PeterR 09/24/98
; [MultiPASS C5000] & [MultiPASS Source]
; Modified PeterR 09/21/98
; [EasyPhoto ImageWave]
; Modified DaveW 09/15/98
; Added entry for PrecisionScan 2.0
; Modified PeterR 09/14/98
; MagicScan32 V4.1
; Modified PeterR 09/12/98
; [Paragon 1200 A3 PRO]
; Modified NickM 09/10/98
; [UMAX ScanIt]
; Modified DaveW 09/09/98
; [Visioneer] Scanners
; Modified PeterR 09/08/98
; [Mustek 1200 III SP]
; Modified PeterR 09/04/98
; [Mustek PARAGON 1200 SP PRO]
; Modified DaveW 09/01/98
; Corrected BASICMODE=1 to BASICMODE=2
; Changed SHOW_UI=2 to BASICMODE=2
; Modified DaveW 08/24/98
; Deskscan 2.8 and 2.9
; Modified PeterR 08/17/98
; EPSON scanners
; Modified PeterR 08/10/98 & 08/25/98
; Modified PeterR 08/27/98
; AGFA scanners
; Modified PeterR 08/06/98
; [CanoScan FB610]
; Modified PeterR 08/05/98
; [Mustek F/B Scanner]
; [Canon IS Scan]
; Modified PeterR 07/31/98
; [HP OfficeJet Series 600]
;Scan Manager 4.0 Scanner Configuration File
;If you are having problems with your TWAIN scanner,
;it is possible that your scanner driver is not fully
;compliant with the provisions of the TWAIN specification.
;You may be able to correct the problem by using the
;Scanner Setup Wizard, or modifying this file directly.
;If a section exists in this file that pertains
;exactly to your scanner, examine the section based on the
;example and provisions below.
;You may need to add a new section to this file similar to
;the example. In any case, edit or add entries as shown below.
;so that your section of statements directly relate to your
;scanner and its parameters.
;EXAMPLE:
;[Name of your TWAIN data source]
;CHOCOLATE=0 (0 = off, 1 = on)
;INVERT=0 (0 = auto, 1 = off, 2 = on)
;LA_INVERT=0(0 = auto, 1 = off, 2 = on)
;SHOW_UI=0(0 = auto, 1 = off, 2 = on)
;BASICMODE=0(0 = auto, 1 = off, 2 = on)
;SIZEONE=0(0 = off, 1 = on)
;RGB_INVERT=0(0 = auto, 1 = off, 2 = on)
;SETSIZE300=0(0 = off, 1 = on)
;COLORFLATBED=0(0 = off, 1 = on)
;(Remember: REMOVE the semicolons from your statement lines.)
; 9-1-98 daw: The following descriptions are correct, but with the values
; listed above.
;Where:
;BASICMODE=0 indicates whether or not the TWAIN Data
;Source user interface will be displayed.
;0 means no, 1 means yes.
;
;INVERT=0 indicates whether or not a gray image will be
;inverted. If your scans appear as black pages
;with white text, and INVERT=1, change INVERT=0.
;Or, if INVERT=0, make INVERT=1.
;
;LA_INVERT=0 indicates whether the binary image (line art)
;will be inverted or not. If your scans appear as black
;pages with white text, and LA_INVERT=1, change LA_INVERT=0.
;Or, if LA_INVERT=0, make LA_INVERT=1.
;
;RGB_INVERT=0 indicates whether the color image
;will be inverted or not. If your scans appear as black
;pages with white text, and RGB_INVERT=1, change RGB_INVERT=1.
;Or, if RGB_INVERT=1, then make RGB_INVERT=1.
;
;THRESHOLD=0 indicates how to get brightness information
;from data source. If you cannot set brightness for
;line art image and THRESHOLD=1, change THRESHOLD=0.
;Or, if THRESHOLD=0, make THRESHOLD=1.
;
;AUTO_BRI=1 determines whether or not grayscale scanning
;can be used with OmniPage. If you have a 256-grayscale
;scanner, this should be set at 1. If you have problems,
;change it to 0.
;
;CHOCOLATE=0 Use this if your data source uses chocolate
; pixels and your brightness settings appear to be reversed.
;IMPORTANT - In your TWAIN scan module dialog box,
;you MUST use also these settings:
;RESOLUTION: 300dpi
;Scaling: 100%
;Scan Frame: 8.5" x 11" or 8.5" x 14"
;Scan Mode: Grayscale or Line Art
;Note: If you use Grayscale, choose 3D OCR or AnyPage in the
;OmniPage Scanner settings panel. If you use Line Art, choose
;Manual brightness in the OmniPage Scanner settings panel.
[FotoLook 32 V3]
LA_INVERT=2
CANCANCEL=0
COLORFLATBED=1
[FotoLook 32 V2]
LA_INVERT=2
CANCANCEL=0
COLORFLATBED=1
[FotoLook 16 V2]
LA_INVERT=2
CANCANCEL=0
COLORFLATBED=1
[Brother MFL Pro Scanner]
BASICMODE=2
BATCHSCAN=2
[CanoScan]
BR_NORM_GRAY=987
BR_NORM_RGB=992
[CanoScan FB610]
LA_INVERT=2
[Canon IS Scan]
BASICMODE=2
[Deskscan II 2.8]
BASICMODE=2
[Deskscan II 2.9]
BASICMODE=2
[EPSON TWAIN(32-bit)]
BASICMODE=2
CANCANCEL=0
[Perfection 600 (32 Bit)]
BASICMODE=2
CANCANCEL=0
[HP OfficeJet Series 600]
WAIT=15
BASICMODE=2
[HP PrecisionScan 1.0]
CLOSEONFINISH=1
[HP PrecisionScan 1.01]
CLOSEONFINISH=1
[HP PrecisionScan LT 1.0]
CLOSEONFINISH=1
[HP PrecisionScan 2.0]
CLOSEONFINISH=1
[HP Printer/Scanner/Copier]
WAIT=5
[HP ScanJet 5s]
BASICMODE=2
CLOSEONFINISH=1
[ScanJet Source]
BASICMODE=2
[Logitech PageScan Color]
BASICMODE=2
CLOSEONFINISH=1
[Logitech PageScan Color Pro]
CLOSEONFINISH=1
BASICMODE=2
[Microtek PageWiz]
BASICMODE=2
[Microtek ScanWizard (32bit)]
COLORFLATBED=1
[MultiPASS C5000]
BATCHSCAN=2
CANCANCEL=0
[MultiPASS Source]
SHOW_UI=2
BATCHSCAN=2
CANCANCEL=0
[Mustek F/B Scanner]
BASICMODE=2
CANCANCEL=0
[Mustek PARAGON 1200SP PRO]
BASICMODE=2
CANCANCEL=0
[Mustek 1200 III SP]
BASICMODE=2
CANCANCEL=0
[Paragon 1200 A3 PRO]
BASICMODE=2
CANCANCEL=0
[ScanPartner Jr/10/10C]
BASICMODE=2
[EasyPhoto ImageWave]
BASICMODE=2
[MagicScan32 V4.1]
BASICMODE=2
INVERT=2
[UMAX ScanIt]
BASICMODE=2
INVERT=2
LA_INVERT=2
[VistaScan32 V2]
CANCANCEL=0
[VistaScan32 V3]
CANCANCEL=0
[OneTouch]
CANCANCEL=0
BASICMODE=2
[PaperPort]
CANCANCEL=0
[OfficeStyler T10]
BATCHSCAN=1